MonkeyLink Monkey Fender Set MTB CONNECT with Rear Light for E-MTB

Thanks to MonkeyLink, your electric mountain bike can be transformed into an everyday vehicle in just a few simple steps. With the complete MonkeyLink plug-in fender set for the pre-equipped ML connection, both wheel protection and rear lighting are securely fastened with just one motion.

The CONNECT bike protection comes with a rear light already integrated into the rear fender. With an optional ML-Light Front CONNECT headlight with the appropriate lighting power (e. g. prod. code: 2268368 or prod. code: 2268374) to get a complete lighting set. Every component can easily find its place via the magnetic connection and locks in place, all on its own. The lights are powered through the separately-available Interface Bike CONNECT (see note). This way, you can quickly connect the lighting components to the battery of your e-bike and can control them directly via the e-bike display.

With the MonkeyLink system, you have all the options for equipping your MTB with splash protection and safety attachments. You have full flexibility to decide whether you want to ride with a fender, lighting or both.

Details:
• MTB fender set with integrated rear lighting for the MonkeyLink system for e-bikes / pedelecs limited to a pedal support up to 25 km/h
• Can be easily removed or mounted thanks to the self-locking magnetic system
• Suitable for all common MTB tyre sizes
• Including integrated rear light for connection to e-bike battery (see note below)
• Approved for all types of bikes according to German StVZO regulations

The MonkeyLink system allows you to mount bike accessories, such as lights or mudguards, to your bike with a flick of the wrist, thanks to a universal mount. The system is specifically designed for bikes without a power supply (RECHARGE) or e-bikes (CONNECT). Magnetic connectors allow for easy installation. One connection – countless possibilities.

Attention:
As some bike manufacturers fit their bikes with the MonkeyLink system as a standard, the fender set is supplied without fastening material and interface. If you want to retrofit the Monkey-Link mudguard set to your bike, you will need additional components (see below).
For the rear fender, you will need a saddle clamp holder (prod. code: 2268388 or 2268389) and the MonkeyLink Interface Bike CONNECT one4all Rear (prod. code: 2281136), which is screwed into the holder. The interface has a cable with open ends with which you can connect the rear light integrated in the mudguard either directly (e.g. SHIMANO, Suntour) or with an optional system-specific plug (e.g. Bosch, Brose) to your bike electrics.

If you also want to mount a MonkeyLink-CONNECT headlight, you will need the MonkeyLink ML-Handlebar Clamp (prod. code: 2268392) or a MonkeyLink compatible stem (such as prod. code: 2268383). You will also need the MonkeyLink Interface Bike CONNECT one4all Front for e-bike drives (prod. code: 2328414) which is screwed into the holder. The interface has a cable with open ends with which you can connect the rear light integrated in the mudguard either directly (e.g. SHIMANO, Suntour) or with an optional system-specific plug (e.g. Bosch, Brose) to your bike electrics.

Technical details mudguards:
• Material: plastic
• Compatible tyre sizes: 26“, 27.5“, 28“, 29“
• Compatible tyre width: max. 3”
• Fender length: 684 mm (rear), 616 mm (front)
• Weight: 490 g (incl. rear light)

Rear light technical details:
• Material: plastic
• Installation: MonkeyLink mount
• Power supply: from 6 to 12 volts (DC, suitable for e-bikes*)
• Lamp: LED
• Lateral beam angle: approx. 220°
• Light modes: 1 (permanent light)
• Protection rating: IPX4 (protection against spray water from all sides)
• Dimensions: approx. 80 mm x 86 mm x 26 mm
• Weight: approx. 44 g

*Note:
The rear light is compatible with a direct current power source (DC) of 6 to 12 volts.
For the exact voltage supply of your e-bike lighting system, please check beforehand with the respective manufacturer.
NOT suitable for dynamo!
NOT approved for e-bikes with a speed above 25 km/h or speed pedelecs!

In the box:
• 1 MonkeyLink Monkey Fender Set MTB CONNECT with integrated rear light

Tip:
If you want to ride at night without fenders, you can simply insert a MonkeyLink Sport CONNECT rear light for e-bikes into the ML saddle clamp instead (such as prod. code: 2278652).