Maxxis Dissector [Gen.2] TR EXO+ MaxxTerra MTB Folding Tyre

Fast direction changes, hard berms and rocky trails are the MAXXIS Dissector's [Gen.2] favourite terrain. The enlarged contact surface of the side and transition knobs builds up cornering grip early and thus provides a direct, safe riding experience.

The centre tread with adapted knob arrangement is designed for high braking control and better adaptation to the ground. Additional sipes throughout the tread support grip and control on dry, loose and rough trails, while the transition knobs positioned far to the outside support harmonious steering behaviour.

This makes the Dissector [Gen.2] suitable as a precise front tyre for down-country, trail and all-mountain bikes with short to medium suspension travel as well as a fast rear tyre for aggressive enduro set-ups on dry surfaces.

In this version, the Dissector [Gen.2] combines the reinforced EXO+ Protection with the further developed MaxxTerra rubber compound for demanding all-mountain and enduro use. The robust construction is designed for increased puncture protection and additional stability, whilst the rubber compound offers high grip, efficient rolling behaviour and optimised mileage.


Technologies:

• EXO+ PROTECTION
EXO+ Protection is based on a 60-TPI casing with an abrasion-resistant rubber coating. The construction is complemented by a reinforced EXO protective layer on the sidewalls and an additional butyl insert above the tyre bead. As a result, the construction is designed for aggressive trail riding, enduro use and the requirements of modern E-MTBs.

• MaxxTerra
MaxxTerra is a single-compound rubber compound from MAXXIS for trail and enduro use. The consistent development of the proven 3C MaxxTerra compound is intended to offer more grip and a longer tread life while maintaining low rolling resistance. The compound thus combines efficient rolling behaviour with high traction on the trail.

• TUBELESS READY [TR]
In the MAXXIS range, Tubeless Ready [TR] refers to tyres with a construction that is designed for tubeless use with a sealant, a compatible tubeless rim or matching rim tape. The system enables lower air pressures and is intended to improve traction and ride quality, while reducing the rolling resistance. In addition, minor damages can be sealed directly by the sealant, which reduces the risk of breakdowns.

Technical details:
• Intended use: All-Mountain, Enduro
• Tyre type: clincher (folding tyre)
• Reflective stripes: No
• Tubeless capability: TR (tubeless ready)
• Casing: 60 TPI
• Puncture protection: EXO+ PROTECTION
• Rubber compound: MaxxTerra

Dimensions: ETRTO / Inch Size / French Size / Weight** / Tyre pressure / Maximum load / E-bike approval*:
61-622 / 29 x 2.40“ / ---- / approx. 1045 g / max. 3.4 bar (49 psi) / 90 kg / E25
*Note:
E-bike approval “no” = no e-bike approval.
E-bike approval "E-25" = approval for pedelecs up to 25 km/h pedal assistance.
E-bike approval "E-50" = approval for S-pedelecs and e-bikes up to 50 km/h subject to compulsory insurance (ECE-R75).
**Attention:
The actual weights may vary depending on the colour variant.


In the box:
• 1 MAXXIS Dissector [Gen.2] TR EXO+ MaxxTerra MTB folding tyre Note:

Illustration shows 3C MaxxTerra version.

Manufacturer: Cheng Shin Rubber Ind. Co. Ltd, Suite 800, 8F, 50, Sec.1,Shin-Sheng S.Rd, 100 Taipei, Taiwan, www.maxxis.com
Responsible person: Maxxis Europe B.V., Neutronenlaan 7, 5405 NG Uden, Netherlands, maxxis-europe.com