Litemove AC-210 e-bike headlight with high beam function and handlebar mount for Rose Slab Plus

The Litemove AC-210 CT1 is a powerful e-bike front light for the Rose Slab Plus with CT1 connection.

Thanks to the handlebar mount supplied, the headlight can be mounted directly on the handlebars. The light cable with a length of 15 cm is connected to the existing light cable underneath the stem. The port is already activated on the Rose Slab Plus so that the light can be switched on and off directly via the Bosch Mini Remote. The AC-210 also has a wired control element on the handlebars to control the high beam.

In addition to the 140 lux low beam, the AC-210 offers a switchable high beam with a lighting power of up to 210 lux. This means that the headlight ensures excellent visibility even on completely dark roads and enables anticipatory riding. The light width of up to 10.5 metres in combination with homogeneous light distribution ensures a perfect overview and safe orientation on the trail.

Details:
• Powerful e-bike headlight for the Rose Slab Plus
• Can also be used for other e-bikes with CT1 connection if required
• Including remote to control the high beam 
• Homogeneous and wide low beam with up to 140 lux lighting power 
• High beam can be switched on with up to 210 lux (handlebar switch)
• MTi-PLUS lens for even light distribution
• Lighting width of up to 10.5 m
• Aluminium housing for excellent cooling and high durability
• Handlebar mount included
• According to German road traffic regulations (StVZO) approved for electric bikes limited to 25 km/h

Technical details:
• Material: aluminium, plastic
• Installation: handlebar mount (Ø 31.8 mm / 35 mm)
• Clamp diameter handlebar switch: Ø 22.2 mm
• Power supply: 12 V DC voltage (11 V - 16V )
• Power consumption: 10 W (low beam), 16 W (high beam)
• Lamp: LED
• Lighting power: up to 140 lux (low beam), up to 210 lux (high beam)
• Light modes: dipped beam, full beam
• Protection category: IP 56 (dust- and waterproof)
• Dimensions: approx. Ø 46 x 52 mm
• Cable length: approx. 150 mm (power connection), approx. 300 mm (handlebar switch connection cable)
• Weight: approx. 128 g

In the box:
• 1 LITEMOVE AC-210 CT1 e-bike front light
• 1 LITEMOVE high beam switch incl. connection cable
• 1 LITEMOVE headlight handlebar mount for side mounting

Note:
ONLY suitable for e-bikes with CT1 connection such as the Rose Slab Plus.

The connection is already activated on the Rose Slab Plus. You can switch the light on and off by pressing and holding the plus button on the Bosch Mini remote.
 

Manufacturer: Litemove, No. 198, Fuya Road, Taichung 40762 , Taiwan, , www.lite-move.com
Responsible person: Litemove Europe c/o futurelectric GmbH, Weissenbrunner Hauptstr. 2, 91227 Leinburg, Germany, info@lite-move.com