•  50 000 produkter tillgängliga för direktleverans
  •  Gratis retur (inom EU)
  •  Personlig betjäning
  •  30 dagars returrätt
  •  Montering i Tyskland

Armour 3-in-1 puncture protection inlay for 27.5“ MTB tyres

SKU
229599102
Abstract Product Id
126119
Concrete Product Id
558657
Tannus

Armour 3-in-1 puncture protection inlay for 27.5“ MTB tyres

(14)
(14)
Artikelnummer: 229599102

277,80kr

Pris inkl. MOMS plus 100,00 kr (för leverans till Sverige)

Storlek

27,5'' x 1.95 - 2.5 27,5'' x 2.6 - 3.0

Leveranstid 1 vecka

Detaljer

The triple protection against punctures and pinch flats.

The Tannus Armour puncture protection is a solution to the most common problems of bicycle tubes. What’s more, it ensures more grip as well as an extra portion of comfort. It was originally designed for strongly stressed bikes, such as e-bikes, cargo bikes, travel bikes or bike sharing fleets that have no room for flat tyres, due to their continuous use. Now, with the 27.5" versions, mountain bikes ranging from marathon racers to plus bikes can also benefit from the reliable puncture protection.

The light foam layer is mounted between tyre and inner tube and surrounds the tube down to the rim base. The Tannus Armour adds near 360° protection from glass, thorns and sharp rocks. In addition to this, the cushioning layer allows you to ride with lower air pressure and generate thus more grip and comfort, without having to worry about punctures and dreaded snakebites.

Millions of tiny air bubbles provide additional shock and vibration cushioning in the Aither 1.1 polymer foam by Tannus. The special material ensures a significantly smoother ride over roots and obstacles. Moreover, the improved puncture protection allows you to ride tyres with lighter casings and thus reduce the system weight. Even if you run out of air for once, this will be no problem: With the foam insert, you can ride on at low speed for a limited period – which will spare you pushing your bike on the last metres.

Note:
For smaller wheel sizes (27.5 x 1.95 – 2.10 | 50/54-584) the lips of the Tannus Armour inserts in 27.5" x 1.95 - 2.50 have to be shortened by approx. 10 mm with scissors! Please also note that the puncture protection inserts require space inside the tyre and you will therefore require a smaller tube. For compatible tube sizes, please see the Specs.

Tip:
In order to fully benefit from the advantages regarding grip and cushioning, Tannus recommends reducing the usual air pressure of road bikes by about one third. For mountain bikes, however, Tannus recommends reducing the air pressure by approx. 0,4 bar compared to tubeless systems and approx. 0,7 bar compared to standard tube systems.

Details:
• 3 in 1 puncture protection insert for 27.5“ mountain bike tyres
• Installation between tube and tyre
• Surrounding protection from punctures and pinch flats
• Prevents deformations caused by lateral forces even with low air pressure
• Optimised profile with material thicknesses from approx. 2 – 15 mm
• Smooth and comfortable ride
• Better traction and lower air pressure
• Aither 1.1 polymer foam for improved shock and vibration cushioning
• Allows riding on after breakdowns for up to 10 km/h (for a limited period)
• Pinch protection when installing tube
• Can be easily removed and used again, recyclable
• Designed for mileages of up to +10.000 km

Specs:
• Material: Aither 1.1 polymer foam
• Material thickness approx. 13 – 15 mm tread protection, approx. 2 – 5 mm side protection, approx. 2 mm rim protection

Version 27.5 x 1.95 – 2.50:
• Compatible tyre sizes: 27.5 x 1.95 – 2.50 / 50-584 -> 63-584
• Compatible tube sizes for smaller tyres (27.5 x 1.95 – 2.10 / 50-584 -> 54-584): 27.5“ x 1.65 – 1.95 / 44-584 -> 50-584
• Compatible tube sizes for larger tyres (27.5 x 2.15 – 2.50 / 55-584 -> 63-584): 27.5 x 1.95 – 2.125 / 47-584 -> 54-584
• Inner rim width: approx. 19 – 33 mm
• Weight: approx. 310g/piece

Version 27.5“ x 2.6 – 3.0:
• Compatible tyre sizes: 27.5 x 2.6 – 3.0 / 65-584 -> 75-584
• Compatible tube sizes: 27.5 x 2.0 – 2.4 / 50-584 -> 63-584
• Inner rim width: approx. 23 – 36 mm
• Weight: approx. 330g/piece

In the box:
• 1 x Tannus Armour puncture protection foam insert 27.5"

more available Tannus Armour 3-in-1 puncture protection inserts:
• Tannus Armour 3-in-1 puncture protection inlay for 29“ MTB tyres (prod. code 2295987)
• Tannus Armour 3-in-1 puncture protection inlay for 28“ road tyres (prod. code 2295988)
• Tannus Armour 3-in-1 puncture protection inlay for 28“ hybrid tyres (prod. code 2295989)
• Tannus Armour 3-in-1 puncture protection inlay for 28“ touring tyres (prod. code 2295990)

Specifikation
GTIN:
193751005605
Recensioner (14)
(10)
(2)
(0)
(0)
(2)

(14)

Skriv utvärdering

Armour 3-in-1 puncture protection inlay for 27.5“ MTB tyres

Färg: 
Standard
Storlek:
27,5'' x 1.95 - 2.5
Moin, die Montage hat gut funktioniert. Fahreigenschaften am MTB gut. Berg ab und mit Strom fährt es sich gut. Sonst halt sehr zäh und schwer.
Aber...!!!
Habe eben den Reifen getauscht, und das Ding ist platt! Kein Schaumstoff mehr, nur noch flaches Kunststoff. Der Reifen Druck lag wechselnd zwischen 0.8-1.5 bar 😔

Armour 3-in-1 puncture protection inlay for 27.5“ MTB tyres

Färg: 
Standard
Storlek:
27,5'' x 2.6 - 3.0
Schneller Versand und tut bis jetzt was er soll

Armour 3-in-1 puncture protection inlay for 27.5“ MTB tyres

Färg: 
Standard
Storlek:
27,5'' x 2.6 - 3.0
Viel kann ich noch nicht dazu sagen, dass wäre zu früh.Die Dinger müssen sich noch bewähren.
Die Montage war nicht so schwer wie einige geschrieben haben man braucht aber ordentlich Werkzeug, keine 99 Cent Reifheber.

Armour 3-in-1 puncture protection inlay for 27.5“ MTB tyres

Färg: 
Standard
Storlek:
27,5'' x 2.6 - 3.0
Habe beide Pannenschutz einlagen in die hinteren Reifen unserer Bikes eingebracht.Am fahrverhalten hat sich nichts geändert. Bleibt abzuwarten wie sich das ganze in nächster zeit verhält. Hoffe das es nun solang hält bis der Mantel abgefahren ist
Das dauert in der Regel 3-4 Jahre. Bis bald

Armour 3-in-1 puncture protection inlay for 27.5“ MTB tyres

Färg: 
Standard
Storlek:
27,5'' x 2.6 - 3.0
Unbrauchbar, Einbau sehr schwierig

Armour 3-in-1 puncture protection inlay for 27.5“ MTB tyres

Färg: 
Standard
Storlek:
27,5'' x 2.6 - 3.0
Lässt sich gut montieren und fühlt sich beim Fahren gut an. Lieferzeit war herstellerbedingt zu lange aber vom Shop angekündigt, deshalb keine Überraschung.

Armour 3-in-1 puncture protection inlay for 27.5“ MTB tyres

Färg: 
Standard
Storlek:
27,5'' x 1.95 - 2.5
Preis, Leistung und Produkte o.k.

Armour 3-in-1 puncture protection inlay for 27.5“ MTB tyres

Färg: 
Standard
Storlek:
27,5'' x 2.6 - 3.0
Facile à monter
Sur le terrain C est top pas de pincement de chambre à air bande de roulement en contact permanent avec le terrain
Vraiment un bon choix car j'en ai marre des crevaison
Christian

Armour 3-in-1 puncture protection inlay for 27.5“ MTB tyres

Färg: 
Standard
Storlek:
27,5'' x 1.95 - 2.5
Nach anfänglicher Skepsis bezüglich der Montage muss ich sagen alles Top. Wenn auch in Zukunft die Pannensicherheit sich als gut erweist hab ich alles richtig gemacht. Das Material jedenfalls macht einen guten Eindruck und ist sehr leicht.

Armour 3-in-1 puncture protection inlay for 27.5“ MTB tyres

Färg: 
Standard
Storlek:
27,5'' x 2.6 - 3.0
Teuer aber gut.
Einbau erfordert etwas Geschick, aber geht gut.

We need your consent to load Youtube.

We use a third-party service to embed video content. This service may collect data about your activities. Please read the details and agree to use the service to view this video.