TRP EVO PRO Disc Brake 4-piston, (right lever/rear wheel)

The TRP EVO PRO disc brake was developed for ambitious downhill, enduro, trail and e-MTB riders who require constant and controllable braking performance even under extreme conditions.

Following on from the success of the DH-R EVO, the EVO PRO has been further developed in close collaboration with athletes from the Downhill World Cup. The revised version offers extended adjustment options, a shorter lever reach and a Pad Activation Dial (PAD), which can be used to specifically influence the distance between the brake pads and the brake disc and thus the response. The 4-piston brake calliper in combination with the race-proven design ensures powerful and even deceleration. 

The ergonomically shaped brake lever supports controlled operation, while the optimised cockpit design enables clean internal or external cable routing. The top loading design facilitates pad changes and simplifies maintenance. The brake is also compatible with Bosch ABS PRO and can be integrated into corresponding e-MTB systems.

Technical details:
• Hydraulic disc brake for downhill, enduro, trail and e-MTB use
• Version with right-hand brake lever, usually for the rear brake
• 4-piston brake calliper for powerful and even deceleration
• Pad Activation Dial (PAD) for setting the pad distance and response
• Lever width adjustment for individual customisation 
• Ergonomically shaped brake lever for controlled operation
• Top loading design for easy pad changes
• Optimised cockpit design for internal or external cable routing
• Compatible with Bosch ABS PRO
• Compatible with SRAM MMX and Shimano I-Spec EV

Technical details:
• Material: aluminium
• Number of pistons: 4
• Brake calliper: post mount
• For handlebar Ø: 22.2 mm
• Brake pads: TRP 4-piston Performance Resin (organic)
• Brake fluid: TRP mineral oil
• Lever reach adjustment: yes (without tools)
• Contact point adjustment: yes
• Shift lever integration: yes (SRAM MMX and SHIMANO iSpec compatible)
• Recommended disc rotor: TRP RS05E, 2.3 mm
• Weight: approx. 323 g (incl. 1900 mm hose, WITHOUT rotors & adapter)

In the box:
• 1 TRP EVO PRO 4-piston disc brake, right lever/rear wheel (filled and bled ready for installation)
• 2 TRP 4-piston Performance Resin brake pads (organic)
• 1 olive and insert pin for shortening the brake hoses

Note:
Intended by the manufacturer for use with 2.3 mm thick brake discs.

Manufacturer: TEKTRO Europe GmbH, August-Bebel-Straße 10, 67454 Haßloch, Deutschland, https://eu.trpcycling.com/de