Rose ALL2GETHER High Performance XXL Bicycle Tool Box

The solidly built ALL2GETHER High Performance XXL tool box for all experienced hobby bicycle mechanics offers a wide range of tools for repair and maintenance works on road bikes, hybrid bikes, city or mountain bikes. It allows you to professionally replace drivetrain components such as chain, chainring and cassette and service your bottom bracket. ROSE’s tool set offers everything you need to properly fit and remove common components and bike parts.

You can already see from the compact and robust plastic box that “XXL” primarily refers to the quality and versatility of the comprehensive tool kit. With this mobile workshop, you are well prepared for special repair and assembly works. The high-quality tools are neatly arranged inside the compartments in the two halves of this tool box, so you’ll always have them ready at hand. The ROSE ALL2GETHER High Performance XXL bike tool box offers you a variety of tools in perfect order.

Contents:
• Chain tool for 6 to 12-speed chains and Campagnolo 8 to 10-speed chains
• Chain wear gauge with built-in chain keeper for all chains with ½" pitch
• Master link pliers for opening and closing bike chains with connector link
• 15 mm pedal wrench
• Crank puller for Octalink, square and ISIS bottom brackets
• Bottom bracket tool for Octalink, square and ISIS bottom brackets with internal splines, for 24 mm spanner or ½“ ratchet
• Torque wrench 4-24 Nm
• Adapter 8 mm hexagon to ½“ fitting
• Star-shaped socket set: T20 / T25 / T30
• Hexagon socket set: 3 / 4 / 5 / 6 / 8 / 10 mm
• Bottom bracket tool for Hollowtech II cranksets
• Bottom bracket adapter plastic SM-BBR60 Ultegra/XT
• Bottom bracket adapter plastic SM-BB9000 Dura Ace/XTR
• Bottom bracket tool for SRAM GXP/Campagnolo, Ultra/Power Torque and Shimano Hollowtech II or identical designs
• Assembly tool with threaded rod and press-in cups for Shimano Pressfit BB86/92 und BB30/PF30 bearing cups; removal tool for Shimano Pressfit BB86/92, BB30, Trek BB90/95 bottom brackets
• Cassette pliers for 10-19 teeth, 6 to 12-speed cassettes
• SHIMANO/SRAM HG/IG cassette lockring tool with ½” socket or 19 mm spanner
• Chainring bolt tool with built-in wrench (9/10 mm) and 2-pin spanner for the removal/installation of integrated crank pullers (16.5 mm spacing)
• Universal spoke wrench 3.2/3.3/3.5
• Cable cutter for inner and outer cables (not for hydraulic brake hoses)
• L-type hex wrench set (2/2.5/3/4/5/6 mm)
• Hexagon socket 6.5 cm extension 5 mm
• 8 mm hex wrench
• L-type star-shaped wrench set (T-10/T-20/T-25/T-30)
• 2 composite tyre levers (extra long)

In the box:
• 1 ROSE ALL2GETHER High Performance XXL Bicycle Tool Box


Attention:
Please follow the manufacturer's instructions for assembly and maintenance works on your bicycle!

The ROSE ALL2GETHER High Performance XXL Bicycle Tool Box was tested by the German magazine MountainBike (issue 11/2022) and is their purchase tip.

Verdict (translated from German): "Small, fully packed hard case with a slightly rough fit. The tool quality is not the best, but it is okay. However, almost all tools fit well in your hand, and the cassette pliers are great! The Rose case scores extra points with its generous additional equipment such as a press tool and a high-quality torque wrench."

The ROSE ALL2GETHER High Performance XXL Bicycle Tool Box was tested by the German magazine RoadBike (issue 12/22) and is their price/performance buying tip.



Manufacturer: Rose Bikes GmbH, Schersweide 4, 46395 Bocholt, Germany, www.rosebikes.de