CyclOn Premium Graphene Hot Wax Hot Chain Wax

The Premium Graphene Hot Wax was developed with the aim of providing every cycling enthusiast with a high-performance chain lubricant that enables high mileage in all conditions.

It should be possible to go 1000 km with just one lubrication. The chain wax is highly resistant to dirt and water and can significantly reduce friction loss in your drivetrain – in practically all weather conditions. Perfect for cyclists who want a chain that runs smoothly and want to use a lubricant all year round that minimises maintenance.

Details:
• Paraffin-based hot chain wax
• Suitable for every type of bike and all weather conditions
• Penetrates deep into the chain interior thanks to the hot wax process
• Leaves behind a dry, dirt and water-repellent wax layer
• Up to 1000 km mileage per application of hot wax
• Graphene additive reduces friction loss and wear
• Resealable can can be placed directly on the heat source

Technical details:
• Contents: 1000 ml

In the box:
• 1 CyclOn Premium Graphene Hot Wax


Tip:
When using the CyclOn hot chain wax, a metal wire passed through an opening in a chain link is a good aid for placing the chain in the wax bath and then removing it again.
To degrease and clean the chain, we recommend the CyclOn Bionet Chain Cleaner (prod. code: 194302100).

Application of the CyclOn Premium Graphene Hot Wax:
Step 1:
Before using Premium Graphene Hot Wax, the removed chain must be completely cleaned of lubricant and dirt and then dried.
Step 2:
Open the tin and place it on a heat source to liquefy the product. Once the wax has melted, carefully place the chain in the tin and leave it there for 10 minutes.
Step 3:
Switch off the heat source and wait about 30 seconds before removing the chain from the tin. Once the wax has hardened, you can remove any excess lubricant on the outside of the chain with a dry cloth. The chain can now be assembled.

ATTENTION:
For safety reasons, you should wear gloves and safety goggles when using the hot wax.