Cykel Växlar

· 9-speed/triple · for 50 mm chain line*1 · for large chainring: 44 teeth · designed for mountain bike frames (26"/29") · capacity: 22 teeth · This Dual Pull front derailleur can be used Top Pull (cable from above)...

· for triple/9-speed Sram/Shimano gearshift systems · capacity: 22 teeth · for large chainring 44/48 teeth · for chain line: 47.5-51mm · cable routing: Bottom Pull (cable from below only) · clamp diameter: 34.9mm

Beautiful and very light clamp (thanks to the milled-out openings) for fastening braze-on front derailleurs to frames without braze-on socket. Attention: you need a special screw (item no. 562251-1 for € 0.50) for...

For use with the SL-R440 8-speed shifter. · 8-speed compatible · capacity: 16 teeth · for large chain wheel: 50 - 53 teeth · for braze-on

· 10-speed/double · integrated front derailleur clamp · clamp Ø: 35 mm · suitable for standard and compact cranksets · guide plates made of aluminium with friction-reducing coating · capacity: 16 teeth · for...

Small but effective! Simply remove the adjustment nut of the rear wheel quick-release and replace it by the Xtreme protector. In case of a crash, the derailleur hanger is effectively protected from deforming, because the...

Clamp, for braze-on derailleur, black, 31.8 mm

Another variation of shift levers. When pulling the lever, the front and rear derailleur shift up or down depending in the guide. When pressing the top cap frontally, the other shift movement is achieved. · material...

· for double/10-speed Sram/Shimano shifting systems · capacity: 15 teeth · for large chainring 45 teeth · for chain line: 49,5mm · cable routing: Bottom Pull (only possible from below) · clamp Ø 34,9 mm

· 10-speed/ triple · for 50 mm chain line *1 · for large chainring: 42 teeth · designed for mountain bike frames (26"/29") · capacity: 18 teeth · This Dual Pull front derailleur can be used as Top Pull (cable from...

The battery holder is mounted under or instead of a bottle holder. Connection cable which is connected to the cable harness of the shift lever and which also has plugs for the front derailleur and the rear derailleur...

The battery mount is mounted under or instead of a bottle cage. Connection cable, which is connected to the cable harness of the ST-7970 and to the connectors for the FD-7970 front derailleur and the RD-7970 rear...

End caps with a stronger taper to an outer Ø 3,8 mm. · suitable for Ø 5 mm · 10 pieces