Stänkskydd skyddar dig och dina kläder från smuts- och vattenstänk. Förutom fastmonterade stänkskydd, finns det också stänkskydd med snabbkoppling, vilka du kan snabbt ta bort om det är nödvändigt.
Plastic-coated clamp for attaching e.g. rear racks or mudguard struts to frames without thread eyelets. · incl. 1 screw M6 x 18 and 22, nut and washer · 1 pair · available in Ø 15.8, 19, 22.2 or 25.4 mm Please...
Same features as 3R - 1 - (item no. 115742-1), but for MTB/ATB. · width: approx. 80 - 130 mm
Once it is mounted, you can easily fit and remove it quickly and at any time without tools. · holder is attached behind the rear wheel brake · suitable for racing bikes with race brakes or correponding drillings ·...
Features same as for item no. 1819098-1, but with V-struts (removable) for fixing to bicycles with eyelets on the fork and rear stay. · incl. mounting material and V-struts
As described under item no. 585177-1, but without copper cable, dirt catcher, contacting, reflector and edge protection. With V-struts at the back. · width: 60 mm
Very light front wheel mudguard made from break-resistant plastic and with snap-on fastening. · width: approx. 80 mm · suitable for tyres up to max. 26" x 2.4 · incl. fixing material and adapter suitable for shaft...
The rear wheel mudguard for tool-free quick fastening to the seat post (Ø 26 - 32 mm) via Powerstrap closure. 2-point adjustment allows for optimal adjustment to all frame geometries. · width: 95 mm · suitable for...
Bold looks and good protection! That is what a mountain biker wants and what the Dirt Blocker DH SL offers. Tool-free adjustment allows the mudguard to be adjusted optimally to the biking situation. · width: approx. 85...
MTB mudguard made of plastic for mounting on suspension forks. The adapter of the quick-release system is screwed into the fork stem virtually invisibly; the mudguard can be plugged in or removed with a single...
Mudguard system made from break-proof PET plastic with numerous clever details. · Safe Clip fastening system for front wheel struts (fig. 1) · short design, i.e. the rear mudguard is fastened to the luggage carrier ·...
Attractive mudguard that can be positioned under the fork using an adapter and can be removed with the push of a button at any time. · width: 70 mm · weight: approx. 115 g · suitable for tyres up to max. 29" x 2.4...
Light mudguard made from impact-resistant plastic with Powerstrap fastening for all common seat post sizes. Suitable for hardtails and full-suspension bikes. · adjustable angle · width: approx. 88 mm · suitable for...
As described under item no. 585177-1, but without copper cable, dirt catcher, contacting, reflector and edge protection. With V-struts at the back. · width: 35 mm
This plug-in mudguard set (FW + RW) is suitable for bikes with rigid or suspension forks**. Once the "Niro" holder has been screwed onto the bike, the plastic mudguards can simply be plugged in. · suitable for 24" - 28"...
Features as for item no. 585166-1, but for 28"/700 C/29" bikes. · width: 70 mm · suitable for tyres up to 29" x 2.4, 28"/700 C x 60 C
Easily and precisely adjustable MTB front wheel mudguard. Cool look. Can be attached directly to the suspension fork (Ø 36-45 mm). Material: injection molded nylon Weight: approx. 330 g Width: approx. 400 mm Suitable...