CYCLUS: Produkter för cyklister

With adjustable stopper and guiding for the pin. · suitable for 7-/8-/9-speed chains · suitable for Shimano 10-speed chains

Such a tool is absolutely indispensable for the correct mounting of headsets, because inappropriate tools (e.g. hammers) often damage the sensitive bearing shells. This Cyclus high-quality tool offers the attributes of a...

· tool for mounting/dismounting FAG, Campagnolo Centaur, Mirage and Veloce bottom brackets · not suitable for Centaur from 2006 series

You can control and correct the exact geometrical position of the derailleur hanger at the dropout with this tool. A contorted derailleur hanger is one of the most common reasons for problems with a bicycle’s...

From GO to STOP - when is the chain really worn? The Cyclus chain wear gauge gives you an accurate answer. With this measuring device made of stainless steel, long term monitoring of chain wear is made possible. The...

A lot of people do not use appropiate tools when mounting cones. The consequences are contorted cones, damaged bearing surfaces and in the worst case the destruction of the cone seat, which makes the whole fork unusable...

Very handy extractor with padded handle and guide pin for additional hold. · suitable for Campagnolo cassettes · not suitable for hubs with full axle

Features same as item no. 493161, but suitable for Shimano cassettes. · not suitable for hubs with full axle

It is not possible to centre wheels with aero spokes without a spoke holder. The six different adapters are suitable for the majority of diameters available on the market. · with markers for simple identification

With its rotatable arm, you can use this tool flexibly for a multitude of bearing cups with pin spanner hole. · max. hole distance: 55 mm · drilling for suspension

- for comfortable and safe dismantling of headset bearing shells - Of course you can get the bearing shells out of the frame somehow without this aid. But frame and tools will certainly suffer and you might even injure...

Professional tool, metal version, suitable for Shimano Hollowtech II cranksets. For mounting/ dismounting the star nut on the left crankarm.

Professional tool for holding chainring nuts in place. · with guiding spike

This tool makes pretensioning child’s play! The Cyclus centering bit can be used in a cordless screwdriver to facilitate the pretensioning of spokes by hand when constructing a new wheel. The centering tip is...

Specially for 9-/10-/11-speed cassettes, with comfortably padded handle.

This metal slide gauge allows measurement accurate to a tenth of a milimetre. · incl. locking screw · incl. plastic box · total measuring range: 15 cm